Category Archives: Uncategorized

MR1 Stage Hire

The Milos MR1 roof System is a 8m x 6m outdoor canopy stage. This is an ideal medium size outdoor stage for a performance or presentation. The useful stage area is approximately 24’ x 20’ (7.3m x 6m). The canopy is freestanding and is 4.95m high in the middle of the arched roof. The stage is approx 3’ high and has a black skirt around with set of treads up to it.

Tables

Technical specifications
Dimensions A Internal width 8.00 m
B Overall external width 9.06 m
C Internal depth 6.40 m
D Overall external depth 7.48 m
E Clearance side 4.43 m
F Clearance middle 5.69 m
G Overall height 5.96 m
H Cantilever depth 1.21 m
Loading capacity
Loading capacity Arches Uniformly distributed (UDL) 15 kg/m
Side truss Uniformly distributed (UDL) 20 kg/m
PA load 2x Point load each cantilever 250 kg
Operational specifications
Design standards DIN EN 13814 (2005)
DIN EN 1991 / Eurocode 1
DIN EN 1999 / Eurocode 9
DIN EN 1993 / Eurocode 3
Fairground and amusement park machinery and structures
Actions on structures
Design of aluminium structures
Design of steel structures
• All our structures are produced as standard under EN 1090 EXC2, including the necessary guy wires, instruction manual and engineering report
Wind management Out of service
In service
28.0m/s – 100km/h – 62mph (Max. gust wind speed)
17.8m/s – 64km/h – 40mph (Max. gust wind speed)
* Calculations based on 100% closed side canopies
* Side canopies and loads to be removed above this wind speed if not considered
Ballast This can vary per tower from 350kg / 771lbs up to 2400kg / 5286lbs and depends on:
• If tower bases are interconnected or free-standing
• Layout of canopies
• Self-weight of load or interconnected stage is considered (Might be deducted from ballast under certain conditions)
• Friction material used between screw jacks, padding and sub soil
Canopy & sidewalls B1 fire retardant canopy on request, single piece format or kedder profiles on request
Silver grey; other colours or inside black on request
B1 fire retardant side nets in compliance with latest Eurocodes
Customised Customisation (i.e. truss configuration, alternative dimensions, roof adjustability) in accordance with requirement
Transportation data
Self-weight * Exact self-weight depends on configuration 1344 kg
Transport volume * Packed in carton boxes and bubble foil 20 m3
Axcor Beam 300
Axcor Beam 300
Axcor Beam 300

Axcor Beam 300

The new Axcor 300 family of moving LED fixtures brings Claypaky’s no-compromise quality and performance to the broad mid-market. The quality of their effects, their construction, and their high light output derive from the high-end products Claypaky specializes in.

The AXCOR BEAM 300 has an even more compact body – less than 500mm – and is able to emit a super-concentrated solid beam with a beam angle as small as 2° and a surprising light output. The wealth and quality of its colors and aerial effects, its electronic focus and its 140 mm diameter front lens make the Axcor Beam 300 the ideal beam moving light in any application area, and the perfect replacement of a Claypaky Sharpy!
It boasts cutting-edge electronic and software technology, with all the features that enable optimal fixture management and maintenance over time. With a price-point, physical size and power consumption that disguise its strength and creative potential, the Axcor Beam 300 enables a new world of expression in touring, events, TV, theatre and installed lighting markets.

Source: 110W White LED engine (7600 K)
Ø 140mm front lens
Beam aperture: 2°
Motorised focus lens
One color wheel with 14 Colors
One gobo wheel with 17 Gobos
Rotating 8-facet Prism
16-bit Electronic Dimmer with 4 curves
Electronic strobe@24 f/sec
Extremely compact and lightweight
Two DMX modes: 14ch / 16ch (Sharpy mode)

Co2 Ice Gun’s

The CO2 Gun is a handheld gun which can blast white cryogenic fog plumes. The CO2 Gun is a new innovative an spectacular eye catcher for DJ’s and dancers! The CO2 Gun must be connected to a CO2 cylinder (liquid CO2) by using a flexible high pressure CO2 hose.

Antari Snow Machines

KI Sound & Light now stock Antari s-500 snow machines in hire stock. These machines are one of the most adaptable snow machine on the market.

See What Antari Say About This Unit 

Meet Antari’s latest snow machine: The S-500. Its main body and 20-Liter fluid tank are placed inside a road case with wheels.

The nozzle is connected by a 10-Meter long hose and it can be easily rigged on a standard truss or tripod stand. Air and snow fluids are delivered to nozzle via the 10-Meter hose. Users can adjust the air volume and fluid flow rate to get the right snow effects needed, from fine snow to blizzards.

The functions of S-500L are exactly same as S-500. The only two differences between S-500L and S-500 are S-500L comes with 20-Meter hose in a larger case. The “L” of S-500L stands for “Large”.

 

Features

●  Optional PM-1 pan motor with 120 degrees pan to increase coverage area

●  Blower built into flight case keep noise level at minimum

●  Extreme high output

●  Adjustable snowflake size

●  Road case for outdoor operation and provide extra protection